APPLICATION

Street LED lighting luminaire

MECHANICAL CHARACTERISTICS

Support frame in die cast aluminium UNI EN1706 powder painted.
Polyurethane seal.
Colour RAL 7016 satinized matt Cod. 3O.
Closure screen in flat tempered glass, 5mm thickness. High transparency.
Removable optical unit in 99.85% aluminium with special finish made by vacuum sealed deposition 99.95%.
Aluminium class A+ (DIN EN 16268).
Removable metal gear plate optional.
Plastic cable gland M20x1,5mm - IP68.
Fixing: bracket or post-top ø60mm
optional ø32mm, ø42mm, ø 48mm, ø76mm.
Captive screws in stainless steel.
IP66 IK09 protection degree.

ELECTRICAL CHARACTERISTICS

Insulation class: I, II.
Power supply: 220-240V - 50/60Hz.
LED current: 400/500 mA.
Power factor: > 0.9 (at full load - F, DA, DAC).
Surge protection: up to 10kV | with SPD (optional) 10kV / 10kV CM/DM.
SPD optional: 10 kV - 10kA, type II, with LED signal and thermo fuse to disconnect load at the end of life.
LED source lifetime:
>100.000hr L90B10
>100.000hr L90, TM21
Available dimming options:
F: Fixed power not dimmable.

DA: Automatic dimming (virtual midnight) with default profile.

DAC: Custom DA profile.

FLC: Constant light flux.

WL: Wireless single point communication system.

DALI: Digital dimming interface DALI.

NEMA: Socket 7 pin (ANSI C136.41).
ZHAGA: Socket 4 pin (ZHAGA Book 18).

AVAILABLE OPTICS

STU-S: Asymmetrical optic for street, urban and cycle-path lighting (narrow emission).
STU-M: Asymmetrical optic for street, urban and cycle-path lighting (meedium emission).
STU-W: Asymmetrical optic for wide urban and suburban road lighting.
STA / STA1: Asymmetrical optic for long interdistance and wide roads, V and P class.
S03: Asymmetrical optic for wide urban and suburban road lighting.

OPTICAL UNIT CHARACTERISTICS