Smart motion sensor for public lighting

Motion sensors to adjust lighting flux according to people movement. Adjust the light according to people passage in city parks or public areas and maximize energy savings.

Intelligent street lighting where it’s needed

Public lighting can be even more efficient thanks to the integration of motion sensors for secuty lights in outdoor lighting. The motion sensors, by detecting the passage of people, regulate the luminous flux by varying the intensity between two preset levels: a lower power level and a higher power level, more suitable for the presence of people. In this way, minimal energy consumption is obtained without affecting safety.

Ideal in public parks

Increase the lighting at the passage of pedestrians

Increase your savings

Decrease the luminous flux in the absence of people
Why choose motion sensor for outdoor lighting?

Motion sensors for smart public lighting

Motion sensors for outdoor public lighting are one of the possibilities of AEC Smart Lighting that leads to a faster return on investment. By being able to further lower the luminous flux in the absence of people, a perfect optimization of operating costs is achieved, which leads to a quick recovery of the investment in this technology. The streetlights are in fact able to reduce the light intensity when there is no movement in the vicinity but bring the luminous flux back to the range required by the regulations, as soon as the presence of people is detected.

Motion sensor for outdoor lighting apllications

Stand-alone mode

Only one motion sensor

A motion sensor is able to control one or more luminaires simultaneously via radio. The typical installation is in small systems in green areas or near a pedestrian crossing.

Lightwave mode

More motion sensors

By placing a motion sensor on each luminaires, it is possible to adjust the light dynamically following pedestrians or vehicles, thus creating a wave of light.

The perfect solution in public parks

Motion sensors for outdoor lighting detect the passage of people by increasing the lighting only when is really necessary

The perfect solution in public parks

Motion sensors for outdoor lighting detect the passage of people by increasing the lighting only when is really necessary

An advantage for installers

The LED street luminaires combined with motion sensors allow you to adapt the street lighting to the real needs of the moment. This creates greater energy savings than simply reducing the luminous flux per hour while ensuring maximum safety for citizens.

Always ensure the right light

Some areas of the city, such as public parks, are too brightly til late at night in the absence of people, but an arbitrary reduction in light output at certain times can compromise safety. The motion sensors for outdoor lighting ensure the right light at all times, because, if they detect the passage of pedestrians, they would increase the luminous flux, which in normal conditions can be at a lower percentage. The advantage therefore is not only the further reduction of consumption but also the reduction of light pollution, when not necessary.

100% luminous flux when people pass

The motion sensors guarantee maximum energy savings and maximum safety

100% luminous flux when people pass

The motion sensors guarantee maximum energy savings and maximum safety

Examples of urban lighting fixtures

Choose the best urban lighting fixtures available with motion sensor

Who you will need to contact to create your system

AEC luminaires are compatible with third-party smart nodes. The complete remote-control system can be provided by one of our partners.

Contact us for a free consulting

Trust the professionalism of an Italian company and choose 100% Made in Italy products

You can discover more about

What smart public lighting really means

Discover more

Discover our solutions for urban park lighting

Discover more

The advantages of public LED lighting

Discover more