APPLICATION
LED luminaire for urban lighting.

MECHANICAL CHARACTERISTICS

Support frame in die cast aluminium alloy UNI EN 1706.
Top cover in turned aluminium UNI EN 485 and steel.
Graphite colour Cod. 01.
EPDM seal.
Screen in flat tempered glass 4mm thickness high transparency.
Optical unit in aluminium finish surface 99.95% with vacuum-sealed deposition. Aluminium Class A+ (DIN EN 16268).
Removable metal gear plate.
Plastic cable gland M20x1.5mm - IP68.
Integrated cable clamp.
Fixing system: post top or bracket mounting in die cast aluminium alloy UNI EN 1706 for poles Ø60mm.
- Post top tilt: max +90°.
- Bracket tilt: max -90°.
Stainless steel closure screws.
IP66 IK08 protection degree

ELECTRICAL CHARACTERISTICS

Insulation class: I, II.
Power supply: 220-240V - 50/60Hz.
LED current: 525/700mA.
Power factor: > 0.9 (at full load).
Connection: connector for cables featured by a maximum cross section of 4mm².
Overvoltage protection up to 10kV | With SPD (optional) 10 kV/ 10 KV CM/DM.
SPD (optional) 10kV-10kA, type II, with LED signal and thermal fuse to disconnect load at the end of life.
Optical unit lifetime:
≥ 100.000hr L90B10
≥ 100.000hr L90, TM-21.
Available dimming options:

F: Fixed power not dimmable.
DA: Automatic dimming (virtual midnight) with default profile.

DAC: Custom DA profile.

FLC: Constant light flux.
DALI: Digital dimming interface DALI.

AVAILABLE OPTICS

STE-M / STE-S: Asymmetrical optic for street, urban and cycle-path lighting.
STU-M / STU-S: Asymmetrical optic for suburban street lighting.
STW: Asymmetrical optic for wide urban and suburban road lighting, specific for wet asphalts.
S05: Asymmetrical optic for street, urban and green areas lighting.

OPTICAL UNIT CHARACTERISTICS