Fixing, canopy and body in die-cast aluminium UNI EN1706 powder coated.
Silicone gasket.
Screen in satinized flat tempered glass thickness 5 mm.
Installations:
TP: post top installation ø60 (ø76mm optional)
S: suspended installation on brackets 1/2” gas
Optical unit 99.85% aluminium with a surface finish in 99.95% with vacuum-sealed deposition. Aluminium grade class A+ (DIN EN 16268).
Removable optical and gear tray compartment. Opening wiring harness and optical compartment with commonly used tools without sealed parts with adhesives.
Mains connection: external connector IP66/68 for cables max section 2.5mm2
Overvoltage protection up to 10kV in common and differential mode.
Integrated SPD 10kV-10kA, type II, provided with LED signalling and thermal fuse for end-of-life load disconnection.
LED source lifetime:
Optic HYPER COMFORT > 100.000hr L90B10
Optic TRIO > 100.000hr L90B10
Available dimming options:
F: Fixed power not dimmable. DA: Automatic dimming (virtual midnight) with default profile.
DAC: Custom DA profile.
FLC: Constant light flux.
WL: Wireless single point communication system.
DALI: Digital dimming interface DALI. NEMA: Socket 7 pin (ANSI C136.41) ZAGHA: Socket 4 pin (ZHAGA Book 18)
AVAILABLE OPTICS
S05: Asymmetrical optic for street, urban and green areas lighting.
S: Symmetrical optic for parking and urban areas.
HC-S: Hyper Comfort symmetrical optic for urban lighting and green areas.
HC-ST: Hyper Comfort asymmetrical optic for urban lighting and green areas.
OPTICAL UNIT CHARACTERISTICS
Modular optical system.
LED light source colour temperature: 4000K (3000K optional).